{"title":"S13 180SX \/ Silvia Parts","description":"\u003cp\u003eThe S13 is where GKTech started and it is still the deepest platform in our range. From drop knuckles and roll centre correction to full suspension arm packages, chassis bracing and cooling, everything here is designed in-house, FEA-tested and proven on drift and time attack builds worldwide.\u003c\/p\u003e\u003cp\u003eAll CA18 and SR20 variants are covered, 180SX and Silvia. Pair with our part-type collections for knuckles, coilovers and sway bars to build out the full setup.\u003c\/p\u003e","products":[{"product_id":"rear-subframe-slip-in-collars","title":"Rear subframe slip-in collars","description":"\u003cp\u003eThe GKTECH rear subframe collars are used to eliminate axle tramp and to also tighten up the rear end giving more precise control of the vehicle under harsh driving conditions. \u003cbr\u003e\u003cbr\u003e - CNC Machined \u003cbr\u003e- 8 Piece Set\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422172762422,"sku":"rear-cllr","price":9200.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_2338.jpg?v=1692235867"},{"product_id":"stainless-steel-tie-rod-end-lock-spacers","title":"Stainless Steel Tie rod end lock spacers","description":"\u003cp\u003eThese spacers slip on to the end of either standard or aftermarket tie rods and allow the tie rods to travel an additional 6mm further into the steering rack which creates more steering lock. Providing around 8-10 degrees more steering angle. Great for drift or getting out of parking spots.\u003c\/p\u003e\n\u003cp\u003e- Easy DIY installation \u003cbr\u003e- CNC machined stainless steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold as a PAIR\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422174171446,"sku":"niss-trod","price":1500.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/niss-trod_tb.jpg?v=1692235888"},{"product_id":"s13-180sx-brake-master-cylinder-stopper","title":"S13\/180sx Brake Master Cylinder Stopper - RHD","description":"\u003cp\u003eThe GKTECH brake master cylinder stopper helps eliminate movement in the brake booster which causes sponginess in the brake pedal under hard driving conditions\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422174662966,"sku":"s13x-bmcs","price":7200.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/s13x-bmcs_tb_1.jpg?v=1692235893"},{"product_id":"s13-180sx-r32-a31-rear-toe-arms","title":"V4 - S13\/180sx\/R32\/A31\/Z32 Rear toe arms","description":"\u003cp\u003eThe new V4 GKTECH suspension arms are an even further improved version of our popular V3 Chromoly arms. The new V4's now have even more adjustment. Rear toe arms give you the ability to adjust and tune your vehicle's rear toe.\u003c\/p\u003e\n\u003cp\u003eThe lengths on these rear toe arms are fully adjustable to your specs when doing an alignment and with the right adjustments, straight line and cornering of your vehicle will be improved.\u003c\/p\u003e\n\u003cp\u003e- V4 arms feature high quality 5\/8\" Teflon lined pillow ball rod ends which eliminate the flex found in factory rubber bushing offering a more direct and predictable feel. \u003cbr\u003e- V4 arms are manufactured from chromoly 28mm OD (3mm wall) tube with billet CNC machined ends with recessed ends for additional strength. \u003cbr\u003e- CAD designed, FEA tested, CNC machined ends, CNC mandrel bent arms (toe arms, camber and rear LCA's), CNC tube notched (camber and LCA's) and TIG welded. \u003cbr\u003e-20 degree bend in the end of the arm to clear chassis rails on lowered vehicles\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: Will NOT suit cars with HICAS previously installed unless you use our lockout bar withclevisto suit. NOTE#2: If you require S14, S15 or R33 Skyline rear toe arms please refer to our other listing to suit.\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422174892342,"sku":"s13x-toex","price":30900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_0397_11.jpg?v=1692235898"},{"product_id":"clear-sr20det-cas-cover-30-second-replacement","title":"Clear SR20DET CAS cover","description":"\u003cp\u003e- Direct replacement of the standard item \u003cbr\u003e- Light weight \u003cbr\u003e- Durable design for the roughest conditions \u003cbr\u003e- Designed for race use \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCAS not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422175252790,"sku":"SR20-CASX","price":3400.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/sr20-casx_tb.jpg?v=1692235903"},{"product_id":"sr20-rb20-rb25-rb26-5-speed-transmission-spring-kit11","title":"Silvia\/Skyline 5 speed transmission shifter return spring kit","description":"\u003cp\u003eThe GKTECH 5 speed transmission spring kit will bring your gear stick back to life by stiffening up the shifter and increasing overall shifter feel.\u003c\/p\u003e\n\u003cp\u003eThe kit comes with 2 sets of springs to suit your preference. This is one of the most simple modifications for increasing shifter feel, highly recommended worldwide!\u003c\/p\u003e\n\u003cp\u003eTo install simply remove the 2 bolts from the side of the transmission under the shifter assembly and install with your choice of springs.\u003c\/p\u003e\n\u003cp\u003eFits all KA24, CA18, SR20, RB20, RB25, RB26 and RB30 5 speed transmissions (will not fit the S15 6 speed transmission)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422175482166,"sku":"trns-spng","price":4900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_0508_1.jpg?v=1692235908"},{"product_id":"s13-180sx-s14-r32-gts-t-solid-shifter-bushing","title":"S13\/180sx\/S14\/R32 GTS-T\/R34 GT-T Solid shifter bushing","description":"\u003cp\u003eThe GKTECH solid shifter bushing is a direct replacement for the plastic OEM item. Replace your old worn factory shifter bushing and you will drastically improve the feel of your shifter. \u003cbr\u003e\u003cbr\u003eA very simple modification that is highly recommended! Fits all RWD CA18, SR20 and KA24 manual transmissions. \u003cbr\u003e\u003cbr\u003e - Light weight aluminium bronze construction \u003cbr\u003e- Direct replacement of your plastic factory item\u003cbr\u003e- Replacement for Nissan OEM part number - \u003cspan data-mce-fragment=\"1\"\u003e32861H7301\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: This bushing can be used with our CD009 S chassis conversion shifter\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422175777078,"sku":"gear-bush","price":1800.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_0321_1_1.jpg?v=1692235913"},{"product_id":"offset-caster-rod-bush-inserts","title":"Offset caster rod bush inserts","description":"\u003cp\u003eThe GKTECH Billet Aluminum offset caster rod end inserts replace the inserts that go into the rose joint of your caster rod and give around 10mm more wheel clearance by moving the caster rod over. \u003cbr\u003e\u003cbr\u003eThese are an easy DIY direct replacement that shouldn't take longer than 10-15 minutes to install.\u003c\/p\u003e\n\u003cp\u003e- Machined from billet 7075-T6 aluminium and anodized for longevity.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422176727350,"sku":"cstr-endx","price":3400.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/cstr-endx1_tb.jpg?v=1692235919"},{"product_id":"s13-180sx-radiator-cooling-panel1airp-s13x","title":"S13\/180SX Radiator Cooling Panel","description":"\u003cp\u003eThe GKTECH air diversion panels sit between your front bumper and the radiator support and not only make your engine bay look cleaner they also serve a purpose. The air diversion panels help to direct air into the radiator as opposed to around it and you will see a drop in coolant temperatures on the track.\u003c\/p\u003e\n\u003cp\u003e- CNC laser cut 2mm aluminium plate\u003cbr\u003e- Available in anodized black\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422177481014,"sku":"airp-s13x","price":10900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/AIRP-S13X-thumb.jpg?v=1692235929"},{"product_id":"solid-subframe-conversion-bushes","title":"Solid rear subframe conversion bushes","description":"\u003cp\u003eThe GKTECH solid subframe conversion bushes are a direct replacement of the standard items and allow you to fit an S14\/S15 rear subframe in your S13\/180sx, aswell as R33\/R34 rear subframein your R32.\u003c\/p\u003e\n\u003cp\u003eThe solid bushes also ensure that movement of the subframe is kept to a minimum. They eliminate axle tramp whilst also raising the subframe 15mm which helps to correct the roll center on lowered vehicles.\u003c\/p\u003e\n\u003cp\u003e- CNC Machined from 6061-T6 aluminium\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422178431286,"sku":"subf-conv","price":19900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_0366_1.jpg?v=1692235940"},{"product_id":"v4-2-s13-180sx-r32-a31-z32-caster-arms","title":"V5 - S13\/180sx\/R32\/A31\/Z32 high clearance caster arms","description":"\u003cp\u003eThe new V5 GKTECH Caster Arms offer the most amount of clearance available in a caster rod while now being 16mm thick AND now have on-car adjustment! \u003c\/p\u003e\n\u003cp\u003eCaster arms (aka tension rods) allow adjustment in vehicle castor to bring the wheels forward and increase steering response. In general, the more caster the better. Allowing sharper turn in and faster return to the straight position when letting go of the wheel.\u003c\/p\u003e\n\u003cp\u003e- V5 arms now feature on-car adjustment to make alignments a breeze! \u003cbr\u003e- V5 arms feature high quality 5\/8\" Teflon lined pillow ball rod ends which eliminate the flex found in factory rubber bushing offering a more direct and predictable feel.\u003cbr\u003e- V5 arms are manufactured from 4130 chromoly sheet with billet CNC machined ends and CNC machined 4130 chromoly adjusters.\u003cbr\u003e- CAD designed, FEA tested, CNC machined ends and TIG welded\u003cbr\u003e- V5 arms include offset bush spacers for even more clearance\u003cbr\u003e- Offers a total of 56mm extra wheel clearance which equates to roughly 9 degrees of additional wheel clearance.\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422178726198,"sku":"s13x-cstr","price":37900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/MG_5698_e1932bbd-c166-4173-9318-548320812ffb.jpg?v=1702847709"},{"product_id":"s13-r32-solid-diff-conversion-bushes","title":"S13\/R32 DIFF BUSH","description":"\u003cp\u003eThe GKTECH S13\/R32 diff bushes are to be used when installing an S14\/S15\/R33\/R34 diff in an S13\/R32 subframe. The typically S14\/S15\/R33\/R34 diffs have bushes on both the front and rear of the diff whereas the S13\/R32 diffs do not. \u003cbr\u003e\u003cbr\u003eYou use the original rear diff cover and then to get the front of the diff positioned correctly and then these bushes are to be installed.\u003c\/p\u003e\n\u003cp\u003eBeing solid they ensure that movement of the diff is kept to a minimum within the subframe which is quite common under hard driving conditions. \u003cbr\u003e\u003cbr\u003e- CNC Machined from 6061-T6 aluminium \u003cbr\u003e- 4 Piece Set \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Longer front mount bolts are required when installing an S14\/S15\/R33\/R34 diff in an S13\/R32 subframe (20mm longer = 80mm thread length). Nissan OEM part number is 55424-33P00\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422179316022,"sku":"S13X-DIFF","price":6600.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/2016-05-04_16.29.00.jpg?v=1692235955"},{"product_id":"s13-silvia-180sx-replacement-overflow-bottle1","title":"S13 Silvia \/ 180sx Replacement Overflow bottle","description":"\u003cp\u003eOne of the most common problems with S13 silvias and 180sx's is cracked overflow bottles. GKTECH have made these to the highest standards and to be a direct replacement of your standard overflow bottle.\u003c\/p\u003e\n\u003cp\u003eOur overflow bottles are stronger than factory and are guaranteed to last the test of time!\u003c\/p\u003e\n\u003cp\u003e- 100% direct replacement of your standard overflow bottle \u003cbr\u003e - Fits both S13 and 180sx\/240sx with any engine setup \u003cbr\u003e - Stronger than the factory overflow bottle. GUARANTEED!\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422180102454,"sku":"s13x-oflw","price":6900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/s13x-oflw-thmb.jpg?v=1692235959"},{"product_id":"turbo-to-intercooler-hotpipe-snout","title":"Turbo to intercooler hotpipe snout","description":"\u003cp\u003eThe GKTECH billet aluminium turbo to intercooler hot pipe snout is 2\" and is a bolt on to most Nissan turbos including T25, T25g, T28, GT2871r, GT3071r (with 3 bolt front housing outlet). A great item if you're installing a different turbo on your car and want an easy way to get your intercooler piping to line up.\u003c\/p\u003e\n\u003cp\u003eAlso includes 6mm vacuum line fitting.\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422180528438,"sku":"trbo-otlt","price":6400.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_4267.jpg?v=1692235964"},{"product_id":"solid-subframe-bushes","title":"Solid rear subframe bushes","description":"\u003cp\u003e\u003cspan\u003eThe GKTECH solid subframe bushes are a direct replacement of the standard items and ensure that movement of the subframe is kept to a minimum. \u003cbr\u003e\u003cbr\u003eThey eliminate axle tramp whilst also raising the subframe 15mm which helps to correct the roll center on lowered vehicles. \u003cbr\u003e\u003cbr\u003e - CNC Machined from 6061-T6 aluminium \u003cbr\u003e- 4 Piece Set\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eShims to suit GTR models: \u003ca href=\"https:\/\/jp.gktech.com\/products\/subframe-bush-spacer-shims-set-of-4\"\u003eSubframe bush spacer shims\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422181445942,"sku":"subf-risr","price":19900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_0358.jpg?v=1692235976"},{"product_id":"s13-180sx-handbrake-extenders","title":"S13\/180sx handbrake extenders","description":"\u003cp\u003eThe GKTECH handbrake extenders are a direct replacement of your standard item and give more leverage which in turn helps lock up the rear brakes. Great for drifting!\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422182330678,"sku":"s13x-hrse","price":8900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_5064_1.jpg?v=1692235991"},{"product_id":"v4-s-r-z32-rear-camber-arms-ruca-s","title":"V4 - S\/R\/Z32 Rear Camber Arms (RUCA's)","description":"\u003cp\u003eThe new V4 GKTECH suspension arms are an even further improved version of our popular V3 Chromoly arms. The new V4's now have even more driveshaft clearance, and even more camber adjustment.\u003c\/p\u003e\n\u003cp\u003eThrough a unique one-of-a-kind design, our camber arms have the MOST amount of adjustment compared to any others on the market. Allowing for more negative adjustment than ever before.\u003c\/p\u003e\n\u003cp\u003eWhen you lower your car negative camber is introduced. This reduces the contact patch of your tyres and thus available traction. Our rear camber arms are a direct replacement of the OEM arm and will correct this issue.\u003c\/p\u003e\n\u003cp\u003eThese camber arms allow for approximately -5\/+7 degrees of camber adjustment. - V4 arms feature high quality 5\/8\" Teflon lined pillow ball rod ends which eliminate the flex found in factory rubber bushing offering a more direct and predictable feel. \u003cbr\u003e\u003cbr\u003e- V4 arms are manufactured from chromoly 28mm OD (3mm wall) tube with billet CNC machined ends. \u003cbr\u003e- CAD designed, FEA tested, CNC machined ends, CNC mandrel bent arms (toe arms, camber and rear LCA's), CNC tube notched (camber and LCA's) and TIG welded. \u003cbr\u003e- 20 degree bend in the end of the arm to clear chassis rails on lowered vehicles\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422183051574,"sku":"rear-cmbr","price":33900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_1657_1.jpg?v=1692236004"},{"product_id":"s14-s15-r33-eccentric-lockout-kit-non-hicas","title":"S14\/S15\/R33 Eccentric lockout kit (non HICAS)","description":"\u003cp\u003e\u003cspan\u003eThe GKTECH eccentric lockout kit replaces the adjustable camber and toe bolts that are prone to slipping under hard driving conditions and ensures that your wheel alignment stays where it was set.\u003c\/span\u003e \u003cspan\u003eTo suit non HICAS equipped vehicles (also available for HICAS equipped vehicles).\u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOTE: If you require S13 Silvia, 180sx, R32 Skyline or A31 Cefiro etc. eccentric lockout kits please refer to our other listing to suit.\u003c\/b\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422188556598,"sku":"s145-bolt","price":7600.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_6502.jpg?v=1764238815"},{"product_id":"28mm-blow-off-valve-return-blocker","title":"28mm Blow Off Valve return blocker","description":"\u003cp\u003eThe GKTECH Blow Off Valve return blocker and is to be used on the intake pipe when the standard blow-off valve is removed. If the hole left from removing the blow-off valve isn't removed, air will get sucked into the intake after the air flow meter and the car will run very rough.\u003c\/p\u003e\n\u003cp\u003e- 1 piece billet aluminium construction - Direct replacement \u003cbr\u003e- 28mm's in diameter\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422191898934,"sku":"univ-bovb","price":2600.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/valve_black_tn.jpg?v=1692236044"},{"product_id":"3-turbo-intake-snout-to-suit-t25-t28-gt2871r-etc","title":"3\" turbo intake snout to suit T25\/T28\/GT2871r etc.","description":"\u003cp\u003eThe GKTECH billet aluminium turbo intake snout has a 3\" inlet and 2.5\" outlet to suit most 2 bolt turbos including T25, T25g, T28, GT2871r, GT3071r (with 2 bolt front housing) etc.\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422196126006,"sku":"trbo-snut","price":6800.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_6739_1.jpg?v=1692236063"},{"product_id":"s13-180sx-r32-hicas-lock-bar","title":"S13\/180sx\/R32 HICAS Lock bar","description":"\u003cp\u003eThe all new V3 chromoly rear HICAS lock bar is a direct replacement of your stock HICAS steering unit and as the name suggest, locks the rear steer in place. Essential for Motorsport or as an option to fix the broken expensive OE Nissan part.\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422201237814,"sku":"hics-lock","price":13900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_9618.jpg?v=1692236076"},{"product_id":"adjustable-rear-traction-rods","title":"V4 - S\/R\/Z32 Adjustable Rear traction rods","description":"\u003cp\u003eThe new V4 GKTECH suspension arms are an even further improved version of our popular V3 Chromoly arms with even more adjustment.\u003c\/p\u003e\n\u003cp\u003eRear traction rods allow adjustment of the rear multi-link suspension. They can be adjusted to eliminate bump steer and alter other rear suspension traction settings to improve suspension response.\u003c\/p\u003e\n\u003cp\u003eThe lengths on these arms are fully adjustable and with the right adjustments, you can change the position and pitch of which the suspension rotates on, along with the amount of \"anti-squat\" of the rear. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e- V4 arms feature high quality 5\/8\" Teflon lined pillow ball rod ends which eliminate the flex found in factory rubber bushing offering a more direct and predictable feel. \u003cbr\u003e\u003cbr\u003e- V4 arms are manufactured from chromoly 28mm OD (3mm wall) tube with billet CNC machined ends with recessed ends for additional strength. \u003cbr\u003e\u003cbr\u003e- CAD designed, FEA tested, CNC machined ends, CNC mandrel bent arms (toe arms, camber and rear LCA's), CNC tube notched (camber and LCA's) and TIG welded.\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422202057014,"sku":"rear-trtn","price":26900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_1712-nw.jpg?v=1692236083"},{"product_id":"sr20-stainless-steel-7-layer-exhaust-manifold-gasket","title":"SR20 Stainless Steel 7 layer exhaust manifold gasket","description":"\u003cp\u003eThis multi-layer stainless steel exhaust manifold gasket is a direct replacement of the standard unit and is an upgrade from your general carbon composite manifold gaskets which are prone to blowing out.\u003c\/p\u003e\n\u003cp\u003e- Race tested and a proven performer \u003cbr\u003e - Replacement for Nissan part 14036-75F00\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422205301046,"sku":"sr20-gskt","price":4600.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/sr20-gskt2_tb.jpg?v=1692236094"},{"product_id":"s13-180sx-r32-r33-r34-z32-eccentric-lockout-kit-hicas-equipped-cars","title":"S13\/180sx\/R32\/R33\/R34\/Z32 Eccentric lockout kit (HICAS equipped cars)","description":"\u003cp\u003e\u003cspan\u003eThe GKTECH eccentric lockout kit replaces the adjustable camber bolts that are prone to slipping under hard driving conditions and ensures that your wheel alignment stays where it was set.\u003c\/span\u003e \u003cspan\u003eTo suit HICAS equipped vehicles (also avaiable for non HICAS equipped vehicles).\u003c\/span\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422206611766,"sku":"s132-bolt","price":4800.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_6498.jpg?v=1692236101"},{"product_id":"sr20-coolant-neck-spacer","title":"SR20 coolant neck spacer","description":"\u003cp\u003eWant to install an aftermarket coolant temp sensor but don't want to cut into your radiator hose? Me either! Instead of doing that simply unbolt your factory coolant neck and install this spacer in between the neck and the head. \u003cbr\u003e\u003cbr\u003eThe spacer has the provision for a 1\/8 NPT provision or alternatively if used in conjunction with a barbed fitting this spacer could be used as the source for a coolant breather tank.\u003c\/p\u003e\n\u003cp\u003e- Lightweight T6-6061 billet aluminium construction \u003cbr\u003e - Direct bolt on\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422207660342,"sku":"clnt-spcr","price":5600.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/clnt-spcr1_tb.jpg?v=1692236106"},{"product_id":"s13-180sx-r32-eccentric-lockout-kit-non-hicas-equipped-cars","title":"S13\/180sx\/R32 Eccentric lockout kit (non HICAS equipped cars)","description":"\u003cp\u003e\u003cspan\u003eThe GKTECH eccentric lockout kit replaces the adjustable camber and toe bolts that are prone to slipping under hard driving conditions and ensures that your wheel alignment stays where it was set.\u003c\/span\u003e \u003cspan\u003eTo suit non HICAS equipped vehicles (also available for HICAS equipped vehicles).\u003c\/span\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422213034294,"sku":"s134-bolt","price":7600.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_6506_thumb_e839827b-f796-4186-a47b-06bcd737d5f7.jpg?v=1692236132"},{"product_id":"5x114-3-spacers-15mm-30mm-8-piece-set","title":"5x114.3 spacers 15mm \u003e 30mm 8 piece set","description":"\u003cp\u003eThe GKTECH 15mm \u0026gt; 30mm spacers allow for adjustment of the fitment of your wheels. The set allows for 9 different widths to be made to ensure perfect wheel fitment, the 9possible widths are 3,15,18,20,22,23,25,27,30mm. The wheel spacers are hub centric to suitNissans66.1mm hub and are manufacturedtothe highest quality in T6061 Aluminium and then hard anodized to further increase the strength.\u003c\/p\u003e\n\u003cp\u003eThe ultimate adjustable width set of spacers. \u003cbr\u003e- CNC machined aluminium T6-6061 construction \u003cbr\u003e- Grade 10.9 studs \u003cbr\u003e- Hub centric to suit 66.1mm Nissan hubs \u003cbr\u003e- 114.3mm PCD with M12 x 1.25 thread \u003cbr\u003e- 60mm long studs \u003cbr\u003e\u003cspan\u003e- Oval shaped studs to prevent stripping of the knurl\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOTE: Sold as a PAIR\u003c\/b\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422216507702,"sku":"spcr-5114","price":25900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/stack5-transformed.jpg?v=1692236146"},{"product_id":"s13-180sx-sr20det-eccentric-throttle-wheel","title":"S13\/180sx SR20DET Eccentric throttle wheel","description":"\u003cp\u003eThe S13\/180sx SR20DET eccentric (ie. off-center) throttle wheel makes the travel of the throttle cable down low in the rev range longer and gives you more control, and makes the travel up high shorter for instant throttle response. Great for drift or even general street use. Seriously, one of the best cheap mods money can buy.\u003c\/p\u003e\n\u003cp\u003e- Light weight 6061-T6 billet aluminium construction \u003cbr\u003e - Direct bolt on replacement of the standard throttle wheel \u003cbr\u003e\u003cb\u003e\u003cbr\u003eNOTE: Some S13\/180sx's SR20 throttle bodies have a longer spring shaft than others. You may need to trim the shaft down around 3-4mm's if it is touching. When installing ensure that it is not touching and if it is, trim it down with a sanding disc or similar\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422219292982,"sku":"S13X-TRTL","price":8400.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_8761_1.jpg?v=1692236153"},{"product_id":"4-to-5-stud-wheel-adapters","title":"4 to 5 stud wheel adapters","description":"\u003cp\u003eThe GKTECH 4 to 5 stud wheel adapters allow a 4x114.3 stud car to fit 5x114.3 stud wheels.\u003c\/p\u003e\n\u003cp\u003eSold as a pair these wheel adapters bolt on to your standard hub just like a normal wheel spacer however 1 of your standard studs is then replaced with a longer stud which runs through the adapter and acts as the 5th stud.\u003c\/p\u003e\n\u003cp\u003eThe wheel adapters are hub centric to suit Nissans 66.1mm hub and are manufactured to the highest quality in T6061 Aluminium and then hard anodized to further increase the strength.\u003c\/p\u003e\n\u003cp\u003eA super easy and cheap way to make your S13\/180sx 5 stud.\u003c\/p\u003e\n\u003cp\u003e- CNC machined aluminium T6-6061 construction \u003cbr\u003e- Grade 10.9 studs - Hub centric to suit 66.1mm Nissan hubs \u003cbr\u003e- 114.3mm PCD with M12 x 1.25 thread - 20mm thick wheel adapters \u003cbr\u003e- Includes extra wheel studs required to install the adapters.\u003cbr\u003e- Sold as a \u003cstrong\u003ePAIR\u003cbr\u003e\u003cbr\u003eNOTE: The kit includes an extra long 13mm knurled stud that needs to replace the OEM stud. All 4 stud models listed either use only a 12.8mm or 13mm stud, however it is recommended to check if you believe your stud may be larger.\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422224929078,"sku":"4to5-spcr","price":16900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/4to5-thmb-transformed.jpg?v=1692236172"},{"product_id":"s13-180sx-4-to-5-stud-front-conversion-hubs-pair-nolongerinuse","title":"S13 Silvia\/180sx 4 to 5 stud front conversion hubs (PAIR)","description":"\u003cp\u003eThe GKTECH 4 to 5 stud front conversion hubs are a direct replacement of the standard item, and are designed to have the standard snap ring, and wheel bearing being able to be swapped over. Using these hubs you are converting the front of your S chassis from 4x114.3 to 5x114.3, not only opening up a world of brake options but allowing the use of superior 5 stud wheels. Remove your 4 stud front hubs, and replace with these 5 stud CNC machined billet chromoly units. Designed to be used with 12.8mm wheel studs, we recommend purchasing them new for perfect knurl fitment and install.\u003c\/p\u003e\n\u003cp\u003eNOTE: Sold as a PAIR \u003cbr data-mce-fragment=\"1\"\u003eNOTE#2: Bearings are NOT included however the hubs are designed to be used with the standard bearings\u003cbr data-mce-fragment=\"1\"\u003eNOTE#3: Grease trap\/ABS ring and snap ring are NOT included \u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422230139190,"sku":"S13X-HUBS","price":26900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_5380_1_1.jpg?v=1692236179"},{"product_id":"s14-s15-subframe-weld-in-reinforcement-plates","title":"V2 S14\/S15 200sx\/Silvia subframe weld in reinforcement plates","description":"\u003cp\u003eThe GKTECH V2 S14\/S15subframe weld in reinforcement plates have been designed from a 3D scan with the addition of CMM data to help to reinforce your subframe where it needs it most. \u003cbr\u003e\u003cbr\u003eLaser cut, steel and dimple died for strength these plates make reinforcement of the rear subframe a heap easier than attempting to do it yourself. The V2 reinforces the area around the rear diff more and the overall fit is better than our previous V1.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eNOTE: Will not work on HICAS subframes. For our HICAS specific version please refer to this listing:\u003ca href=\"https:\/\/jp.gktech.com\/v2-r33-skyline-subframe-weld-in-reinforcement-plates\"\u003ehttps:\/\/jp.gktech.com\/v2-r33-skyline-subframe-weld-in-reinforcement-plates\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422235185462,"sku":"s145-subf","price":15300.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_6377_rev_thumb_0d49659f-3736-480d-ada7-66fd6eecd283.jpg?v=1692236194"},{"product_id":"s12-s13-180sx-s14-s15-jdm-only-r31-r32-r33-a31-c33-z32-n14-rnn14-blank-car-key","title":"S12, S13, 180sx, S14, R31, R32, R33, A31, C33, Z32, N14, RNN14 blank car key","description":"\u003cp\u003eS12, S13, 180sx, S14, R31, R32, R33, A31, C33, Z32, N14, RNN14 blank car key\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNOTE - This is a listing for the metal key only and not the plastic handle, if you require the plastic handle, they can be purchased here:\u003ca href=\"https:\/\/jp.gktech.com\/screwdriver-car-key-end\"\u003ehttps:\/\/jp.gktech.com\/screwdriver-car-key-end\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422239904054,"sku":"BLNK-KEY1","price":424.0,"currency_code":"JPY","in_stock":true}]},{"product_id":"sr-ka-rb-vg-high-performance-engine-fan-60-more-air-flow","title":"SR20\/KA24 High Performance Engine fan - 60% more air flow","description":"\u003cp\u003e\u003cstrong\u003eOver 10,000 sold! This is probably the single best cooling mod you can do to your car!\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe GKTECH high-performance engine fan has been designed and engineered in Australia by our in-house team with the intention of pulling more air than the factory item.\u003cbr\u003e\u003cbr\u003eWhen tested on a dyno the GKTECH high-performance fan took less than half the time to cool down from 90 degrees to operating temperature (good for next time you're on the start line at the track).\u003cbr\u003e\u003cbr\u003eSuper easy to install, simply remove your factory fan (4 bolts) and install the new fan, it is a direct replacement clutch fan to suit the SR\/KA engine.\u003cbr\u003e\u003cbr\u003e- Direct replacement of the standard fan\u003cbr\u003e- Pulls 60% more air than the factory SR fan\u003cbr\u003e\u003cbr\u003eWe do sell an RB\/ VG specific fan which can be seen here: \u003ca href=\"https:\/\/jp.gktech.com\/rb-skyline-gt-r-high-performance-engine-fan-40-more-air-flow\"\u003ehttps:\/\/jp.gktech.com\/rb-skyline-gt-r-high-performance-engine-fan-40-more-air-flow\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Can NOT be used in conjunction with Nismo engine mounts on an S13\/180sx as the mounts raise your motor approximately 20mm's which will make our fan hit your radiator shroud (our fan is 15mm larger in diameter than the OEM SR20 fan) however S14\/S15‚Äôs with Nismo engine mounts are fine and our fan will fit.\u003cbr\u003e\u003cbr\u003eNOTE#2: Do NOT trim the clutch fan if it comes close to intercooler piping. When installing the fan ensure that there is at least 10-20mm's clearance between the fan and anything around it, keeping in mind that your engine moves when under acceleration and braking.\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422240493878,"sku":"CLCH-FANX","price":13900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/SRfan-thumb.jpg?v=1692236208"},{"product_id":"4130-high-tensile-steel-steering-rack-spacer-set","title":"4130 high tensile steel steering rack spacer","description":"\u003cp\u003eThe GKTECH high tensile 4130 zinc coated tie rod extenders screw on to the end of either standard or aftermarket tie rods and allow the tie rods to travel further into the steering rack which creates more steering lock. Great for drift or getting out of parking spots. Can be used either with or without the extra washer (included), with the washer this kit offers a grand total of 19mm of rack travel and 12-15 degrees of extra lock without compromising on the amount of thread left in the steering rack.\u003c\/p\u003e\n\u003cp\u003e- DIY installation (not as easy as the washer install but still not too hard) \u003cbr\u003e- CNC machined high tensile zinc coated 4130 steel\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422242132278,"sku":"TROD-EXTN","price":5280.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_0168.jpg?v=1692236217"},{"product_id":"v2-s13-180sx-r32-gts-t-subframe-weld-in-reinforcement-plates","title":"Subframe weld in reinforcement plates","description":"\u003cp\u003eThe GKTECH V2 S13\/180sx\/R32 GTS-T subframe weld in reinforcement plates have been designed from a 3D scan with the addition of CMM data to help to reinforce your subframe where it needs it most. \u003cbr\u003e\u003cbr\u003eLaser cut, steel, and dimple died for strength these plates make reinforcement of the rear subframe a heap easier than attempting to do it yourself. The V2 reinforces the area around the rear diff more and the overall fit is better than our previous V1.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Rear toe arm supports are to be discarded if the subframe was originally HICAS equipped.\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422244917558,"sku":"s13x-subf","price":13600.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/2016-09-26_14.42.40_1.jpg?v=1692236239"},{"product_id":"stand-alone-ss-braided-brake-line-kit","title":"Stand alone SS braided brake line kit","description":"\u003cp\u003eThe GKTECH Wilwoodstand-aloneSS braided brake line kit are designed to be used with Wilwoodcalipersin the rear and to be used with a Wilwood master cylinder (with a 1\/8NPT thread). These lines go all the way from the master cylinder to the rearcalipers.\u003c\/p\u003e\n\u003cp\u003eThe lines are assembled by us in-house in Australia using stainless steel fittings, stainless steel braided line with a Teflon inner tube and PVC outer for protection.They have passed independent testing and are marked as complying to FMVSS106 standards, ADR approved and are DOT compliant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill suit ALL S\/A chassisNissans.\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422246588726,"sku":"STAL-BRKE","price":19900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/STAL-BRAKE-THUMB-_0000_IMG_E6655.jpg?v=1692236248"},{"product_id":"41mm-s-chassis-clutch-pivot-ball","title":"41mm SR20\/CA18\/RB20 strengthened clutch pivot ball","description":"\u003cp\u003eThe GKTECH 41mm SR20\/CA18\/RB20 clutch pivot ball is a direct replacement of the standard item however it is considerably stronger being made from 40Cr steel.\u003c\/p\u003e\n\u003cp\u003eIf upgrading to a heavy duty clutch it is a good idea to swap out the clutch fork pivot. \u003cbr\u003e \u003cbr\u003e- Alternative for Nismo part 30537-RS540\u003cbr\u003e- Fits all SR20DE\/DET, CA18DE\/DET and RB20DE\/DET applications\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422248096054,"sku":"SR20-BALL","price":3200.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/2015-10-14_13.11.30.jpg?v=1692236259"},{"product_id":"s13-s14-s15-damper-delete","title":"S13\/S14\/S15 Damper Delete","description":"\u003cp\u003eThe GKTECH braided clutch lines are a direct replacement of the factory lines and are stronger (read: more reliable) than the factory rubber lines which are prone to breaking but they also eliminate the spongy feel of the clutch.\u003c\/p\u003e\n\u003cp\u003eThe line runs direct from the master cylinder to the slave. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe GKTECH braided brake lines are assembled by us in-house in Australia using stainless steel fittings, stainless steel braided line with a Teflon inner tube and PVC outer for protection. They have passed independent testing and are marked as complying to FMVSS106 standards, ADR approved and are DOT compliant.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: Will not fit LHD applications. For LHD cars please see our alternate listing for a LHD specific clutch line\u003c\/span\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422250160438,"sku":"CLCH-LINE","price":5400.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_8385_1_14_1.jpg?v=1692236281"},{"product_id":"offset-steering-rack-extenders","title":"V3 4130 high tensile offset steering rack extenders","description":"\u003cp\u003eThe GKTECH high tensile 4130 zinc coated offset tie rod extenders screw on to the end of either standard or aftermarket tie rods and allow the tie rods to travel further into the steering rack which creates more steering lock with the added bonus of moving the tie rod position forward 25mm's which helps reduce steering bind.\u003c\/p\u003e\n\u003cp\u003eGreat for drift or getting out of parking spots. The offset rack spacers are a great alternative to moving the steering rack forward and offer 19mm's extra steering lock without compromising on the amount of thread left in the steering rack.\u003c\/p\u003e\n\u003cp\u003e- DIY installation (not as easy as the washer install but still not hard at all) \u003cbr\u003e- CNC machined high tensile zinc coated 4130 steel with grade 12.9 bolts\u003cbr\u003e- 1\/2\" internally driven drive bolt size for an easy install\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: These may require notching to the early model steering racks, as the OEM notches can vary across models\/years.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422250422582,"sku":"OFFX-RACK","price":13900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/photo_22-9-20_9_16_03_am_1.jpg?v=1692236288"},{"product_id":"4x114-3-spacers-15mm-30mm-8-piece-set","title":"4x114.3 spacers 15mm \u003e 30mm 8 piece set","description":"\u003cp\u003eThe GKTECH 15mm \u0026gt; 30mm spacers allow for adjustment of the fitment of your wheels. The set allows for 9 different widths to be made to ensure perfect wheel fitment, the 9 possible widths are 3,15,18,20,22,23,25,27,30mm. The wheel spacers are hub centric to suit Nissans 66.1mm hub and are manufactured to the highest quality in T6061 Aluminium and then hard anodized to further increase the strength.\u003c\/p\u003e\n\u003cp\u003eThe ultimate adjustable width set of spacers. \u003cbr\u003e- CNC machined aluminium T6-6061 construction \u003cbr\u003e- Grade 10.9 studs \u003cbr\u003e- Hub centric to suit 66.1mm Nissan hubs \u003cbr\u003e- 114.3mm PCD with M12 x 1.25 thread \u003cbr\u003e- 60mm long studs \u003cbr\u003e\u003cspan\u003e- Oval shaped studs to prevent stripping of the knurl\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOTE: Sold as a PAIR\u003c\/b\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422254027062,"sku":"spcr-4114","price":25900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/stack-transformed.jpg?v=1692236321"},{"product_id":"s-chassis-dual-caliper-brackets-to-suit-wilwood-caliper-pair","title":"S-chassis dual caliper brackets to suit Wilwood caliper (pair)","description":"\u003cp\u003eThe GKTECH S-chassis dual caliper bracket allows the use of a Wilwood 120-10188 caliper in conjunction with an OEM S chassis rotor\/caliper combo for use as a standalone hydraulic handbrake.\u003c\/p\u003e\n\u003cp\u003eIt is super simple to install with the only modification being to the standard dust cover. Alternatively, avoid wasting time shopping around for all the individual parts, getting custom brake lines made up, or running generic parts that may or may not work and check out our complete kit.\u003c\/p\u003e\n\u003cp\u003eAs seen here at a 10% off combo discount:\u003cbr\u003e\u003ca href=\"https:\/\/jp.gktech.com\/products\/wilwood-s-chassis-dual-caliper-hydraulic-handbrake-setup-10-combo-discount\"\u003eWILWOOD S-CHASSIS DUAL CALIPER HYDRAULIC HANDBRAKE SETUP - (10% COMBO DISCOUNT)\u003c\/a\u003e\u003cbr\u003e \u003c\/p\u003e","brand":"Wilwood","offers":[{"title":"Default Title","offer_id":46422255075638,"sku":"DUAL-BRKT","price":19900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/dual_brkt-transformed.jpg?v=1692236326"},{"product_id":"billet-aluminium-solid-gearbox-mount","title":"S13\/S14\/S15\/ R32 GTS-T Skyline Billet aluminium solid gearbox mount","description":"\u003cp\u003eThe GKTECH solid gearbox mount is a direct replacement of the standard item and drastically increases the feel of the gearbox. \u003cbr\u003e\u003cbr\u003e- CNC Machined from 6061-T6 billet aluminium and anodized black\u003cbr\u003e- Includes all fittings required for a direct install\u003cbr\u003e- Fits the Gktech Z33 350z\/ Z34 370z Crossmember with slight shaving to one side\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422257500470,"sku":"SLID-GBOX","price":8900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/slid-gbox1_tb.jpg?v=1692236332"},{"product_id":"s14-s15-r32-r33-r34-z32-ball-joint-shank","title":"S14\/S15\/R32\/R33\/R34\/Z32 ball joint shank","description":"\u003cp\u003eS14\/S15\/R32\/R33\/R34\/Z32 ball joint shank  Also to suit the Gktech rear lower control arms - SKU - REAR-LCAX\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSold as a pair\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422261334326,"sku":"145SHANK","price":4900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/IMG_2513.jpg?v=1692236348"},{"product_id":"s14-s15-k-frame-caster-mount-weld-in-reinforcement-plates","title":"S-Chassis K-Frame\/Caster mount weld in reinforcement plates","description":"\u003cp\u003eThe GKTech weld in K frame\/caster rod plates has been designed to help brace one of, if not the most necessary area on your S-chassis. Caster rods put an immense amount of load on the K frame and the K frame itself flexes under load a visually noticeable amount. Our weld in plates will help eliminate this which will result in better overall handling and steering feedback. The added benefit is that if you ride over a ripple strip at the race track (or a gutter on the street) the flat bottom of the K frame will help glide you over rather than you getting stuck and pulling half your car to pieces.\u003c\/p\u003e\n\u003cp\u003e- CAD Designed\u003cbr\u003e- CNC Laser Cut from 2mm C30 steel\u003cbr\u003e- Dimple died for increased rigidity\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"S13\/180SX","offer_id":46422262710582,"sku":"S13X-KFRM","price":10900.0,"currency_code":"JPY","in_stock":true},{"title":"S14\/S15","offer_id":46422262743350,"sku":"S145-KFRM","price":10900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_4839_2.jpg?v=1692236363"},{"product_id":"s13-silvia-radiator-cooling-panel-side-panels1","title":"S13 Silvia Radiator Cooling Panel Side Panels (Pair)","description":"\u003cp\u003eThe GKTECH S13 Silvia air diversion panels sit between your headlights and the radiator support and help clean up the look of your car.\u003c\/p\u003e\n\u003cp\u003e- CNC laser cut 2mm aluminium plate\u003cbr\u003e- Sold as a pair (left and right)\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422263464246,"sku":"AIRP-S132","price":9900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/AIRP-S132-thumb.jpg?v=1692236371"},{"product_id":"s13-180sx-40mm-roll-center-correction-kit","title":"V2 S13\/180SX bolt on angle kit (RCC Kit)","description":"\u003cp\u003eThe V2 GKTECH roll center correction kit is now made from 1030 forged steel and provides 1.57'' (40mm) of roll center correction,1.57'' (40mm) of bump steer correction and also re-positions the steering arm to increase steering lock. With two different pickup points for the tie rod, this now offers two settings, allowing for more aggressive steering response and less Ackerman which will provide faster steering!\u003c\/p\u003e\n\u003cp\u003eThe roll centre correction kit bolts up to the bottom of your standard knuckle and can be removed with no ramifications at all. Circa 60+ degrees of locks achievable without offset rack spacers once the factory LCA lock stop is removed but if you're running lots of camber or caster using our offset rack spacers is a good idea to avoid steering bind.\u003c\/p\u003e\n\u003cp\u003eWith supporting modifications these can see similar lock to V4 drop knuckles! With the introduction of our NEW price, they are by far the cheapest way of getting both roll centre correction and lock!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: These will increase camber as it pushes the bottom of the wheel out 0.98'' (25mm) so best to only use with adjustable camber tops.\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE#2: If you are running S14\/S15 knuckles in your car then you will need the S14\/S15 RC correction kit as these are knuckle specific\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWant to see these in action? \u003cbr\u003e\u003c\/strong\u003eThe following car only has our RCCK, slip in rack spacers and high clearance castor arms. All other parts OEM.\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/CP_IMG_2490_0fe393b5-e223-4c43-9b7f-45d22e5379fb.jpg?v=1716885641\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422264545590,"sku":"S13XRCK","price":27900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/img_2668_1_1.jpg?v=1692236377"},{"product_id":"hydraulic-handbrake-assemblyhydr-hbrk","title":"Hydraulic Handbrake assembly","description":"","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422265790774,"sku":"HYDR-HBRK","price":9900.0,"currency_code":"JPY","in_stock":true}]},{"product_id":"v2-adjustable-rear-lower-control-arms","title":"V2 Adjustable Rear lower control arms","description":"\u003cp\u003eThe V2 GKTECH Rear Lower Control Arms (aka LCA's) are built to a high standard and are far from the generic garbage that most people are used to, but at a very reasonable price. These arms are CAD designed, FEA tested, track tested (including 2 accidental crashes), have CNC machined ends, they're mandrel bent, CNC tube notched and TIG welded and to finish the arms off they're E-coated (aka electrophoresis coating) for rust prevention.\u003c\/p\u003e\n\u003cp\u003eTo top it off we're exclusively using high-quality Teflon lined bearings (over $140 in bearings cost for the pair on their own) Our rear lower control arms allow for + or - 15mm's of track width and are the only LCA's that we know of that allow adjustment perpendicular to the centreline of the car which means that as you change the width your wheel doesn't push further back or forward into the wheel arch (unintentionally altering your suspension curves).\u003c\/p\u003e\n\u003cp\u003eWider track for FR cars gives more grip and less body roll and by adjusting the rear LCA's you can alter a vehicles understeer\/oversteer properties. \u003cbr\u003e\u003cbr\u003e- Feature 5\/8\" Teflon lined spherical (inner) and high misalignment 3\/4sphericals (outer) which eliminates the flex found in factory rubber bushing offering a more direct and predictable feel. \u003cbr\u003e- Manufactured fromchromoly22mm OD (2.5mm wall) tube and 4130chromolysheet with CNC machined ends. \u003cbr\u003e- CAD designed, FEA tested, CNC machined ends, CNC mandrel bent arms, CNC tube notched and TIG welded \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWant more technical information, product benefits and a look into the design process? Click here:\u003c\/strong\u003e \u003ca href=\"https:\/\/jp.gktech.com\/v2-adjustable-rear-lower-control-arms\"\u003ehttps:\/\/jp.gktech.com\/v2-adjustable-rear-lower-control-arms\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: If you are intending on running the rear LCA's any wider than 10mm's over factory it is recommended that you run axle spacers as seen here:\u003ca href=\"https:\/\/jp.gktech.com\/v2-axle-spacers-5mm-10mm-or-15mm\"\u003ehttps:\/\/jp.gktech.com\/v2-axle-spacers-5mm-10mm-or-15mm\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE#2: If you're are intending on running the rear LCA's any shorter than around -5mm please ensure that your suspension arms have adequate inward adjustment. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE#3: If you are intending on running the rear LCA's shorter than the OEM arms please ensure that your upper arms have adequate adjustment based on your setup. A raised subframe and\/or drop knuckles both reduce the amount of negative adjustment available.\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422267298102,"sku":"REAR-LCAX","price":89900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/2016-09-21_14.15.28_1.jpg?v=1692236402"},{"product_id":"2-pot-nissan-stand-alone-ss-braided-brake-line-kit","title":"2 pot Nissan stand alone SS braided brake line kit","description":"\u003cp\u003eThe GKTECH 2 pot Nissan stand alone SS braided brake line kit is designed to be used with Nissan 2 pot calipers, when setting up a dual caliper hydraulic handbrake kit. \u003cspan\u003eThese lines go all the way from any selected master cylinderwith a 3\/8-24 threadto the rear calipers. As seen in our V2 handbrake assembly, as seen here:\u003ca href=\"https:\/\/jp.gktech.com\/v2-hydraulic-handbrake-assembly\"\u003ehttps:\/\/jp.gktech.com\/v2-hydraulic-handbrake-assembly\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe GKTECH braided brake lines are assembled by us in-house in Australia using stainless steel fittings, stainless steel braided line with a Teflon inner tube and PVC outer for protection. They have passed independent testing and are marked as complying to FMVSS106 standards, ADR approved and are DOT compliant.\u003c\/span\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422269493558,"sku":"2POT-LINE","price":22900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/IMG_6216_ade4e199-5fe4-4789-8b3d-5220681cdfe0.jpg?v=1692236409"},{"product_id":"2-pot-nissan-dual-caliper-brackets-pair","title":"2 pot Nissan dual caliper brackets (pair)","description":"\u003cp\u003eThe GKTECH 2 pot Nissan dual caliper bracket is unique in that it doesn't require the use of Mustang rotors (common among others) and only spaces the hub out 7mm's with limited modifications required to fit.\u003c\/p\u003e\n\u003cp\u003eIn addition to the minimal spacing, this is also the only bracket that we're aware of that retains the factory drum handbrake. Compatible with either a pair of Z32, R32, R33 or R34 2-piston rear calipers using the corresponding rotor.\u003c\/p\u003e\n\u003cp\u003eIf you don't want to waste time shopping around for all the individual parts, getting custom brake lines made up, or running generic parts that may or may not work and check out our complete kit.\u003c\/p\u003e\n\u003cp\u003eAs seen here at a 10% off combo discount:\u003cbr\u003e\u003ca href=\"https:\/\/jp.gktech.com\/products\/2-pot-nissan-dual-caliper-hydraulic-handbrake-setup-10-combo-discount\"\u003e2 Pot Nissan dual caliper hydraulic handbrake setup\u003c\/a\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":46422270476598,"sku":"2POT-BRKT","price":32900.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/4468\/7414\/files\/caliper-brack-transformed.jpg?v=1692236421"}],"url":"https:\/\/jp.gktech.com\/en\/collections\/s13.oembed","provider":"GKTech Japan","version":"1.0","type":"link"}