V2 S13/180sx 4H to 5H 変換ハブ (PAIR)

Q: What is backorder?
When a product is on backorder, it means that we have sold out and we are opening a back order due to popular demand. This is essentially a queue, when new stock arrives from production, we’ll send your order.


Q: How long does backorder take?
If an ETA isn’t currently set, we are working with production to confirm an ETA. We will normally have this confirmed within 5 days so please check back shortly.


Q: Will items in my order that are in stock be shipped out first?
We will send your order altogether once your backorder item is ready! You may wish to place separate orders if you want an item before the other is due back in stock.

From ¥20,570

To ¥23,650

The GKTECH 4 to 5 stud front conversion hubs are a direct replacement of the standard item, and are designed to have the standard snap ring, and wheel bearing being able to be swapped over.

Customize:
S13/180sx 4 to 5 stud front conversion hubs (PAIR)   + ¥0
Backorder

* Please be aware if you select a product that is out of stock, on backorder or states an eta, your order will only be shipped once all products are in stock. If you are unsure, contact us.

Summary
V2 S13/180sx 4H to 5H 変換ハブ (PAIR)
V2 S13/180sx 4H to 5H 変換ハブ (PAIR)

In stock

¥20,570

Your Selection Breakdown:

    description

    The GKTECH 4 to 5 stud front conversion hubs are a direct replacement of the standard item, and are designed to have the standard snap ring, and wheel bearing being able to be swapped over.

    Designed to be used with 14.3mm wheel studs.

    Remove your 4 stud front hubs, and replace with these 5 stud CNC machined billet chromoly units.

    Vehicle Compatibility:
    - Nissan S13 Silvia
    - Nissan 180sx
    - Nissan A31 Cefiro

    NOTE: Sold as a PAIR
    NOTE#2: Bearings are NOT included however the hubs are designed to be used with the standard bearings
    NOTE#3: Grease trap/ABS ring and snap ring are NOT included

    FAQ's

    Do you make these to suit other cars?

    No, we only sell the products listed on our website. If it's not listed on here, then we don't sell it. Sorry.

    Do you make these for the rear?

    No, we only make the fronts however S14, S15, R32, R33 and R34 hubs fit right up (non GTR). 

    Are bearings included?

    No, you can buy new bearings from Nissan or any bearing shop. We don't include bearings as some people may not want to replace the bearings and the standard S13 bearings can be reused.

    Is there anything else that I need to install the wheel spacers?

    The only thing that you won't be able to reuse is the wheel studs so you will need new wheel studs (and 1 more than what you previously had). Apart from that, the original bearings, circlip and nut can all be reused (assuming they're in  good condition)

    user_install

    No user install photos currently available.
    Copyright © 2007 - 2021 Geskin International Pty. Ltd. T/as GKTECH. All Rights Reserved.