V2 S13/180sx/R32 メンバー溶接補強プレートキット

In stock

Ships if ordered in the next 1 day, 13 hours and 44 minutes!

¥8,960

The GKTECH V2 S13/180sx/R32 subframe weld in reinforcement plates have been designed from a 3D scan with the addition of CMM data to help to reinforce your subframe where it needs it most. Laser cut, steel and dimple died for strength these plates make reinforcement of the rear subframe a heap easier than attempting to do it yourself. The V2 reinforces the area around the rear diff more and the overall fit is better than our previous V1.

description

The GKTECH V2 S13/180sx/R32 subframe weld in reinforcement plates have been designed from a 3D scan with the addition of CMM data to help to reinforce your subframe where it needs it most. Laser cut, steel and dimple died for strength these plates make reinforcement of the rear subframe a heap easier than attempting to do it yourself. The V2 reinforces the area around the rear diff more and the overall fit is better than our previous V1.

Vehicle Compatibility:
- Nissan 180sx
- Nissan S13 Silvia
- Nissan R32 GTS/GTS-T Skyline
- Nissan R32 GTR (Toe & Diff brace to be discarded)
- Nissan C33 Laurel 

NOTE: Rear toe arm supports are to be discarded if the subframe was originally HICAS equipped.

FAQ's

Will these fit my car?

We can only confirm fitment of the vehicles listed above. If your vehicle isn't listed there then we can't be sure. Sorry

Will these fit my R32 GTR?

Although not specifically made for GTR, the traction, camber and lower control arm braces will fit, however the toe and diff brace will not.

How hard is this kit to install?

It is pretty straight forward however the subframe does need to be out of the car to weld in these plates. You'll also obviously need access to a welder. Gluing these in wouldn't be anywhere near as effective

Are these plates effective?

Yes, absolutely. Broken subframes are pretty common, especially in drift/motorsport applications. Just as people seam weld their cars, the subframe should not be forgotten. Remembering that it takes a heap of the stress under load.

user_install

No user install photos currently available.
Copyright © 2007 - 2020 Geskin International Pty. Ltd. T/as GKTECH. All Rights Reserved.