SR20 クーラントネックスペーサー(水温センサ取付可)

Only 2 Left

Q: What is backorder?
When a product is on backorder, it means that we have sold out and we are opening a back order due to popular demand. This is essentially a queue, when new stock arrives from production, we’ll send your order.


Q: How long does backorder take?
An ETA isn’t currently set as we are working with production to confirm an ETA. We will normally have this confirmed within 5 days so please check back shortly.

*In the event of unforeseen delay from production or shipment arrival, we will do our best to let you know


Q: Will items in my order that are in stock be shipped out first?
We will send your order altogether once your backorder item is ready! You may wish to place separate orders if you want an item before the other is due back in stock.

¥4,180

Want to install an aftermarket coolant temp sensor but don't want to cut into your radiator hose? Me either! Instead of doing that simply unbolt your factory coolant neck and install this spacer in between the neck and the head.
The spacer has the provision for a 1/8 NPT provision or alternatively if used in conjunction with a barbed fitting this spacer could be used as the source for a coolant breather tank.

description

Want to install an aftermarket coolant temp sensor but don't want to cut into your radiator hose? Me either! Instead of doing that simply unbolt your factory coolant neck and install this spacer in between the neck and the head.
The spacer has the provision for a 1/8 NPT provision or alternatively if used in conjunction with a barbed fitting this spacer could be used as the source for a coolant breather tank.

- Light weight T6-6061 billet aluminium construction
- Direct bolt on
- Confirmed fitment for all RWD SR20's, both SR20DE and SR20DET's.

NOTE: These will NOT fit front wheel drive SR20's.

FAQ's

Do you make these to suit other cars?

No, we only sell the products listed on our website. If it's not listed on here, then we don't sell it. Sorry.

Where does this go?

This part goes in between the coolant neck on the passenger’s side of the motor and the head.

What’s the advantage of this spacer over getting a spacer in the radiator hose?

The spacer is sandwiched up against the head so it is much safer than a cut in between a flexible hose which is then sealed with clamps.

Is there anything else that I need to install this spacer?

You will need some gasket sealant and some basic tools. Installation shouldn’t take much longer than about 30-45 minutes and is quite easy. We recommend removing your intercooler piping and intake piping if it’s in the way.

user_install

No user install photos currently available.
Copyright © 2007 - 2020 Geskin International Pty. Ltd. T/as GKTECH. All Rights Reserved.