GKTECH
V3 86/ GR86/ZC6 BRZ BOLT ON ANGLE KIT WITH ACKERMAN ADJUSTMENT
What is a Backorder?
Q: What is backorder?
When a product is on backorder, it means that we have sold out and we are opening a back order due to popular demand. This is essentially a queue, when new stock arrives from production, we’ll send your order.Q: Will items in my order that are in stock be shipped out first?
We will send your order altogether once your backorder item is ready! You may wish to place separate orders if you want an item before the other is due back in stock.The GKTECH ZN6 86/GR86/ ZC6 BRZ bolt on angle kit is a simple, lightweight, yet super effective bolt on steering kit.
It is a bolt on kit, meaning it can be fitted and removed with no modifications. A completely reversible install.
With 30% faster steering these are suitable for both the dedicated drift cars whilst working equally as well for a grip/street car looking to speed your steering up.
If you own one of these vehicles, you would know the OEM steering angle on the GT86 sucks! We measured them to having less than 40 degrees lead wheel and even less trailing. This kit will allow you to get around 60 degrees of lock lead wheel and with adjustable ackerman you can acheive near parallel front steering.
More information on this can be seen in the FAQ below.
- 30% faster steering
- Adjustable ackerman
- Circa 60 degrees of steering lock
FAQs
Will this fit the aluminium knuckle?No, this is designed to suit the steel knuckle only.
Does installing this kit require a wheel alignment?
Yes, it alters both toe so a wheel alignment will be required after installation.
Will this fit my car?
We can only confirm fitment for the vehicles listed above under vehicle compatibility. If your car is not listed there, then we don't know if it will fit.
Is there anything else needed for installation?
There is nothing else that is critical to the installation but offset rack spacers are a good idea to help with steering bind.
They can be seen/purchased here: Steering rack extenders
What size wheel spec should I use for best clearance?
Any size wheel would work, but optimally for the GT86 chassis you want as much inside clearance as possible so that you can clear the frame rails etc on lock.
When testing we used a 18x9 +12 wheel for most of our bolt on angle kit testing to get the most amount of lock.
Can I install this myself? If so how long will installation take?
Yes, provided you have general mechanical knowledge as they are relitively straightforward. Installation time should be around 30 minutes. However, being a suspension component we recommend only a trained professional to install this product
Are there any special tools required?
No, a spanner set will do the job which we do sell separately here - Open ended spanners
VEHICLE COMPATIBILITY
Subaru
BRZ ZC6Toyota
GT86 ZN6Customer Reviews
Honeslty perfect kit to get some more angle on the car. Install went smooth just had to do minimal trimming the install video helps out a lot. Here’s one pictures before and after.10/10
Can’t recommend this lock kit enough!! Only thing I recommend is extended rack ends (which I’ve ordered) as on my application the thread engagement on the factory rack ends is questionable (2014 BRZ). But awesome product & very easy install. Highly recommend for any GT86/BRZ owner!!!
Love this kit so much already. Make sure you order extended inner tie rods to get the right amount of thread engagement!
Ordered a ticket to wetpan 4 days before the event and ordered the GT86 bolt on angle kit with 1-3 day shipping, got there fast as and got it in. Not quite as "bolt on" as expected, you gotta grind down the knuckle (sorry neighbours at 9pm) and would really love to see them mention that it throws off stabiliy control and that the stock tie rod inners barely reach and don't quite make the minimum thread engagement even with the Ackerman adjusted to the inner settings however it survived 4 brutal hours of wetpan and went hard as lock to lock, steering felt so easy it was like cheating and I ordered some extended inner tie rods for safety so for a weekend drift nugget it's a good product. Info page could use a little extra detail though.
Quite easy to install, I had to grind down a tab on the control arm with excess material to get it to sit flush, but other than that, it was straight forward.
After installation, lock is considerably better, running 8.5" wide wheels, it hits the inner chassis. Recommend running a narrower front wheel to avoid scrubbing.
One thing that is not mentioned, is when driving normally, the traction control will kick in all the time with slight steering wheel turning which can be extremely annoying, by long holding the Traction button for 3 seconds, this makes it less annoying to do daily driving. Unsure if there is any calibration or modification to fix this issue. this is no fault of the kit itself, but worth noting
Customer Photos
Customer Reviews
Honeslty perfect kit to get some more angle on the car. Install went smooth just had to do minimal trimming the install video helps out a lot. Here’s one pictures before and after.10/10
Can’t recommend this lock kit enough!! Only thing I recommend is extended rack ends (which I’ve ordered) as on my application the thread engagement on the factory rack ends is questionable (2014 BRZ). But awesome product & very easy install. Highly recommend for any GT86/BRZ owner!!!
Love this kit so much already. Make sure you order extended inner tie rods to get the right amount of thread engagement!
Ordered a ticket to wetpan 4 days before the event and ordered the GT86 bolt on angle kit with 1-3 day shipping, got there fast as and got it in. Not quite as "bolt on" as expected, you gotta grind down the knuckle (sorry neighbours at 9pm) and would really love to see them mention that it throws off stabiliy control and that the stock tie rod inners barely reach and don't quite make the minimum thread engagement even with the Ackerman adjusted to the inner settings however it survived 4 brutal hours of wetpan and went hard as lock to lock, steering felt so easy it was like cheating and I ordered some extended inner tie rods for safety so for a weekend drift nugget it's a good product. Info page could use a little extra detail though.
Quite easy to install, I had to grind down a tab on the control arm with excess material to get it to sit flush, but other than that, it was straight forward.
After installation, lock is considerably better, running 8.5" wide wheels, it hits the inner chassis. Recommend running a narrower front wheel to avoid scrubbing.
One thing that is not mentioned, is when driving normally, the traction control will kick in all the time with slight steering wheel turning which can be extremely annoying, by long holding the Traction button for 3 seconds, this makes it less annoying to do daily driving. Unsure if there is any calibration or modification to fix this issue. this is no fault of the kit itself, but worth noting