GKTECH
RB Skyline/GT-R/Z32 High Performance Engine fan - 40% more air flow
What is a Backorder?
Q: What is backorder?
When a product is on backorder, it means that we have sold out and we are opening a back order due to popular demand. This is essentially a queue, when new stock arrives from production, we’ll send your order.Q: Will items in my order that are in stock be shipped out first?
We will send your order altogether once your backorder item is ready! You may wish to place separate orders if you want an item before the other is due back in stock.After selling over 10,000 units of our fans on the almighty SR20, we have now made an RB specific variant.
The GKTECH high-performance engine fan has been designed and engineered in Australia with the intention of pulling more air than the factory item.
When tested on a dyno the GKTECH high-performance fan took less than half the time to cool down from 90 degrees to operating temperature (good for next time you're on the start line at the track).
Super easy to install, simply remove your factory fan (4 bolts) and install the new fan, it is a direct replacement clutch fan to suit RB, VG engines
- Direct replacement of the standard fan
- Pulls 40% more air than the factory RB fan
NOTE#2: Do NOT trim the clutch fan if it comes close to intercooler piping. When installing the fan ensure that there is at least 10-20mm's clearance between the fan and anything around it, keeping in mind that your engine moves when under acceleration and braking.
FAQs
Will this fit my car?We can only confirm fitment for the vehicles listed above under "vehicle compatibility". If your car is not listed there, then we don’t know if it will fit.
Do you make these to suit other cars?
We only sell the parts listed on our website. If it’s not listed on our website, then we don’t sell it. Sorry.
What’s the advantage of using the GKTech engine fan?
We tested the clutch fan on a test vehicle in a controlled environment (on a dyno) with back to back tests and from 90 degrees celsius, it took less than half the time to go from 90 degrees to idle operating temperature. We found the fan pulls 40% more air than the factory RB fan.
What modifications are required, is this hard to fit?
No modifications are required, simply just remove and refit.
Is there anything else needed for installation?
You will need to supply your own clutch pack.
Can I install this myself? If so how long will installation take?
Yes, provided you have general mechanical knowledge it is straightforward. Installation should take around 45 minutes. However, being a vital engine component we recommend only a trained professional to install this product.
How do clutch fans compare to thermo fans?
If you’ve ever been to the track with thermo fans you know that unless setup with a shroud and correctly, they’re useless. Clutch fans with the standard shroud are the way to go.
What’s the weight on the clutch compared to the standard item?
The standard clutch fan is 430mm’s in diameter which is the same diameter as ours and coincidentally also weighs 640grams.
What is the clutch fan made of?
The clutch fan has a metal center (like the factory unit) and is made of ABS plastic (like the factory unit).
Will I lose any engine power with the fan pulling more air?
No, with our dyno tests on the same car within 30 minutes of each test with multiple runs made we actually GAINED around 1% in power with the new clutch fan installed. The cause of this? There was less heat soak and everything was running cooler.
Which way do I install it?
The fins on the fan are to taper back towards the engine.
VEHICLE COMPATIBILITY
Nissan
CEFIRO A31R31 SKYLINE
R32 SKYLINE GTR
R32 SKYLINE GTS-T
R32 SKYLINE GTS4
R33 SKYLINE GTR
R33 SKYLINE GTS
R33 SKYLINE GTS-T
R33 SKYLINE GTS4
R34 SKYLINE GT
R34 SKYLINE GT-T
R34 SKYLINE GTR
WGNC34 STAGEA
Z32 300ZX
USER GUIDE(S)
Install Videos
Customer Reviews
Currently using this fan on my 500WHP R33, Can't complain, it definitely pulls way more air than the stock fan, may be that is the reason why its only just a touch louder than OEM fan but it gets the job done. Even better if you got oil cooler installed next to Driver side headlight, as that extra air pulling capability of the fan helps to keep the oil temps down.
**It would be good if GKTECH can check and list on the page, if this fan fits the aftermarket Clutch/HUB as the OEM Clutch/HUB is either very expensive to buy or its always out of stock and very difficult to source**
Yes, work good very yes much
Heard they are noisy but I think the opposite, cleared my cooler piping where factory fan wouldn't. Also didn't wait long for delivery. Cheers
I've read online that some people had issues with the fan being too loud. I haven't experienced this at all. I would recommend this when using a larger radiator to get the most airflow.
Love the fan fit perfectly in my r33
Customer Reviews
Currently using this fan on my 500WHP R33, Can't complain, it definitely pulls way more air than the stock fan, may be that is the reason why its only just a touch louder than OEM fan but it gets the job done. Even better if you got oil cooler installed next to Driver side headlight, as that extra air pulling capability of the fan helps to keep the oil temps down.
**It would be good if GKTECH can check and list on the page, if this fan fits the aftermarket Clutch/HUB as the OEM Clutch/HUB is either very expensive to buy or its always out of stock and very difficult to source**
Yes, work good very yes much
Heard they are noisy but I think the opposite, cleared my cooler piping where factory fan wouldn't. Also didn't wait long for delivery. Cheers
I've read online that some people had issues with the fan being too loud. I haven't experienced this at all. I would recommend this when using a larger radiator to get the most airflow.
Love the fan fit perfectly in my r33