S14/S15/R33/R34 ハイキャスロックバー
S14/S15/R33/R34 ハイキャスロックバー

GKTECH

S14/S15/R33/R34 ハイキャスロックバー

セール価格¥8,910 JPY
SKU: hics-lock
在庫あり
数量:

What is a Backorder?

Q:バックオーダーとは何ですか?

製品が入荷待ちの場合は、完売し、人気のため入荷待ちを開始していることを意味します。これは基本的にキューであり、生産から新しい在庫が到着すると、注文が送信されます。

Q: 注文した商品は在庫があるものから先に発送されますか?

ご注文商品の準備ができ次第、まとめて発送いたします。他の商品が再入荷する前に商品が必要な場合は、別々にご注文いただくことをお勧めします。

まったく新しい V3 クロモリ リア HICAS ロック バーは、純正 HICAS ステアリング ユニットを直接交換するもので、名前が示すとおり、リア ステアを所定の位置にロックします。モータースポーツに欠かせないもの、または壊れた高価な日産純正部品を修理するためのオプションとして。

よくある質問

HICAS ロックバーを使用する利点は何ですか?
HICAS ロック バーは標準ユニットを置き換え、車両後部の予測可能性を高めます。車をドリフトさせたり、サーキットに持ち込む予定がある場合は必須です。

HICASは実際に何をするのですか?
HICAS システムは取り扱いを支援することを目的としていますが、このテクノロジーが 20 年ほど前のものであることを考えると、確かに優れたものではなく、ほとんどの人に嫌われています。興奮しながら運転中に HICAS が機能していると感じたことがあるなら、おそらく、できるだけ早くそれを削除したいと思うでしょう。

自分の車に HICAS が搭載されているかどうかを確認するにはどうすればよいですか?
HICAS 装備車には、パワーステアリングのリザーバーレベルセンサーがキャップに組み込まれており、リザーバー内部に 2 本のワイヤーとフロートが組み込まれています。このワイヤーを使ってパワーステアリングキャップを外すと、車の始動時にHICASライトが点灯します。車の後部の下を見ると、油圧ホースと、後輪を操向するためにディファレンシャルとリアサスペンションに接続された別のステアリングラック装置も見つかります。キーがオンでモーターが始動していない場合、警告灯点灯 (HICAS) ライトも表示されます。

この HICAS ロックバーは私の車に適合しますか?
当社は、「車両の互換性」に記載されている上記の車両への適合のみを保証できます。あなたの車がそこにリストされていない場合、それがあなたの車に適合するかどうかはわかりません。私たちには答えが分かりませんので、質問しないでください。

この HICAS ロック バーを取り付けても、HICAS ライトは点灯したままになりますか?
はい、ECU が正しく動作していないと判断した場合、ダッシュボードの HICAS ライトは点灯したままになります。この問題は、ダッシュボードの後ろにある HICAS 警告灯の電球を取り外すことで簡単に解決できます。

この HICAS ロック バーを取り付けるために他に必要なものはありますか?
いいえ、必要なものはすべて含まれています (当然、工具は含まれません)。

車両の互換性

日産

R32 スカイライン GTR
R32 スカイライン GTS-T
R33 スカイライン GTS-T
S13 CA18 180SX
S13 CA18 シルビア
S13 SR20 180SX
S13 SR20 シルビア

Customer Reviews

Based on 10 reviews
100%
(10)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Rickey alexander
Great item

The material of the item looks really strong.

A
Aden cheesbrough
Gtr r32 hicas bar

Bolted in no fitting problems looks great, would buy again

Z
Zak Alexander
Gktech lockout kit

Came in 2 days, fit perfectly, nice overall design and finish, came with everything I needed to cap the lines and delete the hicas and at a reasonable price. 10/10 would recommend

M
Marjorie Adams
Not Exactly what I needed

The part received was as advertised, but trying to pull the tie rods out of an R32 HICAS rack to swap them into the GKTech lockout bar is a challenging ordeal. You need a HUGE vise and special wrenches to get the rack apart. Then, I found that there was play in the ball sockets of my existing rack, so it was better to just order the complete HICAS delete kit...so I returned the lockout bar.

Replacement Tie Rods are about $100 each, so to buy this part and install it with the lockout bar would only save you having to press out the ball joints in the knuckles IF you build it up with OE Tie Rods. Using the existing Tie Rods (providing you can successfully remove them from the rack) is an iffy proposition as well if they are worn at all...stars have to align properly to use this.

GKTech make a quality product, there are others that market this same piece, but (for me anyway) its usefulness is debatable...

l
larry jaramillo
r32 lock out bar

shipped super fast and was overall pretty easy to install . best bang for your buck for hicas delete

Customer Reviews

Based on 10 reviews
100%
(10)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Rickey alexander
Great item

The material of the item looks really strong.

A
Aden cheesbrough
Gtr r32 hicas bar

Bolted in no fitting problems looks great, would buy again

Z
Zak Alexander
Gktech lockout kit

Came in 2 days, fit perfectly, nice overall design and finish, came with everything I needed to cap the lines and delete the hicas and at a reasonable price. 10/10 would recommend

M
Marjorie Adams
Not Exactly what I needed

The part received was as advertised, but trying to pull the tie rods out of an R32 HICAS rack to swap them into the GKTech lockout bar is a challenging ordeal. You need a HUGE vise and special wrenches to get the rack apart. Then, I found that there was play in the ball sockets of my existing rack, so it was better to just order the complete HICAS delete kit...so I returned the lockout bar.

Replacement Tie Rods are about $100 each, so to buy this part and install it with the lockout bar would only save you having to press out the ball joints in the knuckles IF you build it up with OE Tie Rods. Using the existing Tie Rods (providing you can successfully remove them from the rack) is an iffy proposition as well if they are worn at all...stars have to align properly to use this.

GKTech make a quality product, there are others that market this same piece, but (for me anyway) its usefulness is debatable...

l
larry jaramillo
r32 lock out bar

shipped super fast and was overall pretty easy to install . best bang for your buck for hicas delete