S14/S15/R33/R34 ハイキャス除去トーコン化マウント
S14/S15/R33/R34 ハイキャス除去トーコン化マウント

GKTECH

S14/S15/R33/R34 ハイキャス除去トーコン化マウント

セール価格¥9,790 JPY
SKU: HICS-TOE2
数量:

What is a Backorder?

Q:バックオーダーとは何ですか?

製品が入荷待ちの場合は、完売し、人気のため入荷待ちを開始していることを意味します。これは基本的にキューであり、生産から新しい在庫が到着すると、注文が送信されます。

Q: 注文した商品は在庫があるものから先に発送されますか?

ご注文商品の準備ができ次第、まとめて発送いたします。他の商品が再入荷する前に商品が必要な場合は、別々にご注文いただくことをお勧めします。

トー アーム マウント付きのまったく新しい V3 クロモリ リア HICAS デリート バーは、純正の HICAS ステアリング ユニットを交換し、非 HICAS サブフレーム上の正確な位置に通常のトー アーム用のマウントも備えています。モータースポーツに欠かせないもの、または壊れた高価な日産純正部品を修理するためのオプションとして。

※S13系のトーアームの取り付けに対応

よくある質問

HICASステアリングラックを交換するメリットは何ですか?
HICAS ステアリング ラックを取り外すと、車両後部の予測可能性が高まります。車をドリフトさせたり、サーキットに持ち込む予定がある場合は必須です。

HICASは実際に何をするのですか?
HICAS システムは取り扱いを支援することを目的としていますが、このテクノロジーが 20 年ほど前のものであることを考えると、確かに優れたものではなく、ほとんどの人に嫌われています。興奮しながら運転中に HICAS が機能していると感じたことがあるなら、おそらく、できるだけ早くそれを削除したいと思うでしょう。

自分の車に HICAS が搭載されているかどうかを確認するにはどうすればよいですか?
HICAS 装備車には、パワーステアリングのリザーバーレベルセンサーがキャップに組み込まれており、リザーバー内部に 2 本のワイヤーとフロートが組み込まれています。このワイヤーを使ってパワーステアリングキャップを外すと、車の始動時にHICASライトが点灯します。車の後部の下を見ると、油圧ホースと、後輪を操向するためにディファレンシャルとリアサスペンションに接続された別のステアリングラック装置も見つかります。キーがオンでモーターが始動していない場合、警告灯点灯 (HICAS) ライトも表示されます。

この HICAS ロックバーは私の車に適合しますか?
当社は、「車両の互換性」に記載されている上記の車両への適合のみを保証できます。あなたの車がそこにリストされていない場合、それがあなたの車に適合するかどうかはわかりません。私たちには答えが分かりませんので、質問しないでください。

この HICAS ロック バーを取り付けても、HICAS ライトは点灯したままになりますか?
はい、ECU が正しく動作していないと判断した場合、ダッシュボードの HICAS ライトは点灯したままになります。この問題は、ダッシュボードの後ろにある HICAS 警告灯の電球を取り外すことで簡単に解決できます。

この HICAS ロック バーを取り付けるために他に必要なものはありますか?
はい、通常の HICAS ロックアウト バーとは異なり、このユニットは通常のトー アームと組み合わせて使用​​するように設計されています。通常のトゥアームを購入する必要があり、ナックル側のブッシュも交換する必要があります(両方販売しています)。

車両の互換性

- 日産 スカイライン R33 GTR (フィン無しリアデフカバーのみ)
- 日産 ステージア S2 RS4S

注: S13/180sx/R32 トーアーム (ベアリング間隔 40mm) と併用します。
注: #2: トーアームを取り付けるためのナットとボルトが付属

日産

R33 スカイライン GTR
R33 スカイライン GTS
R33 スカイライン GTS-T
R34 スカイライン GT
R34 スカイライン GT-T
S14 200SX/シルビア
S15 200SX/シルビア

ユーザーガイド)

Engineering Certificates

Download HICS-TOE1 HICS-TOE2 Cert

Customer Reviews

Based on 5 reviews
60%
(3)
0%
(0)
40%
(2)
0%
(0)
0%
(0)
M
Marin Marin
Well made

Well made, like everything else on offer. Improves the handling significantly. A little confusion can occur if purchasing the rear toe arms separately to the kit... Anyway, read carefully when ordering.

O
Oliver Lines
R33

Best quality products on the market highly recommend to all high performance car owners,
Thanks GKTECH TEAM.

R
Richard
HICAS Delete Bar and S13 240sx/R32 Skyline toe arms 100% FIT PERFECTLY on a 1995 JDM Nissan Skyli...

I wanted to eliminate the HICAS system on my 1995 JDM Nissan Skyline R33 GT-R Series 1. I reached out to the sales team at gktech and sent them pictures of the rear subframe. John the General Manager looked at the photos and felt confident that the HICAS Delete Bar and the S13 240sx/R32 Skyline toe arms would work. I made the purchase and the parts came in the mail right away. I just got done installing them tonight and I can confirm 100% that these parts will bolt right up to the R33 GT-R with no issues. I am very happy with my purchase and I plan on purchasing more products in the future.

A
Ameen
My Fault, but still annoyed

Purchased the HICAS lockout bar to install into stock toe arms. Accidentally purchased this one instead of the direct replacement without the toe arm mounts. Didn't realise until I went to chuck it in almost a year later. Don't do this mistake people if you're not upgrading your toe arms.

Hi Ameen, providing the item is brand new (and current model) you're welcome to return it to swap it over. Reach out to the guys in sales to discuss

J
Jesse
My fault but still slightly annoyed

I got this to install on my R33 but didn’t read the description properly (F). Mostly writing this to stop anyone else making my mistake. I brought r33 Hardrace rear toe arms to complement the hicas delete but they DO NOT fit due to this needing R32 toe arms to work. I have since got r32 toe arms and it fits well

Hi Jesse, please note that we have not done this for no reason. We have done this specifically so that a 40mm width arm can be used rather than the S14/S15 50mm arm can be used which would sit the clevis too far offset from the bar itself.

Customer Reviews

Based on 5 reviews
60%
(3)
0%
(0)
40%
(2)
0%
(0)
0%
(0)
M
Marin Marin
Well made

Well made, like everything else on offer. Improves the handling significantly. A little confusion can occur if purchasing the rear toe arms separately to the kit... Anyway, read carefully when ordering.

O
Oliver Lines
R33

Best quality products on the market highly recommend to all high performance car owners,
Thanks GKTECH TEAM.

R
Richard
HICAS Delete Bar and S13 240sx/R32 Skyline toe arms 100% FIT PERFECTLY on a 1995 JDM Nissan Skyli...

I wanted to eliminate the HICAS system on my 1995 JDM Nissan Skyline R33 GT-R Series 1. I reached out to the sales team at gktech and sent them pictures of the rear subframe. John the General Manager looked at the photos and felt confident that the HICAS Delete Bar and the S13 240sx/R32 Skyline toe arms would work. I made the purchase and the parts came in the mail right away. I just got done installing them tonight and I can confirm 100% that these parts will bolt right up to the R33 GT-R with no issues. I am very happy with my purchase and I plan on purchasing more products in the future.

A
Ameen
My Fault, but still annoyed

Purchased the HICAS lockout bar to install into stock toe arms. Accidentally purchased this one instead of the direct replacement without the toe arm mounts. Didn't realise until I went to chuck it in almost a year later. Don't do this mistake people if you're not upgrading your toe arms.

Hi Ameen, providing the item is brand new (and current model) you're welcome to return it to swap it over. Reach out to the guys in sales to discuss

J
Jesse
My fault but still slightly annoyed

I got this to install on my R33 but didn’t read the description properly (F). Mostly writing this to stop anyone else making my mistake. I brought r33 Hardrace rear toe arms to complement the hicas delete but they DO NOT fit due to this needing R32 toe arms to work. I have since got r32 toe arms and it fits well

Hi Jesse, please note that we have not done this for no reason. We have done this specifically so that a 40mm width arm can be used rather than the S14/S15 50mm arm can be used which would sit the clevis too far offset from the bar itself.