Z33 350Z/V35 リジットミッションマウント
Z33 350Z/V35 リジットミッションマウント
Z33 350Z/V35 リジットミッションマウント

GKTECH

Z33 350Z/V35 リジットミッションマウント

セール価格¥12,540 JPY
SKU: Z33X-MUNT
在庫あり
数量:

What is a Backorder?

Q:バックオーダーとは何ですか?

製品が入荷待ちの場合は、完売し、人気のため入荷待ちを開始していることを意味します。これは基本的にキューであり、生産から新しい在庫が到着すると、注文が送信されます。

Q: 注文した商品は在庫があるものから先に発送されますか?

ご注文商品の準備ができ次第、まとめて発送いたします。他の商品が再入荷する前に商品が必要な場合は、別々にご注文いただくことをお勧めします。

GKTECH Z33 350Z/V35 スカイライン ソリッド ギアボックス マウントは、標準品の直接交換品で、エンジンとギアボックスの動きを軽減してパワーを地面に伝えるのに役立ちます。車が定期的にスロットルをオフにしたりオンにしたりするドリフトカーやサーキットカーで特に役立ちます。

- 6061-T6 ビレットアルミニウムから CNC 加工され、黒に陽極酸化処理
- 日産部品番号の交換部品: 11320-CD000 および 11320-RRZ30

注: NVH (ノイズ) が大幅に増加します。日常的なドライバーやレース専用でないドライバーには理想的ではありません。


よくある質問

これは私の車に適合しますか?
当社では車両適合欄に掲載されている車両への適合のみ確認しております。

GKTech ソリッド ギアボックス マウントを使用する利点は何ですか?
頑丈なギアボックス マウントにより、エンジンとドライブラインの動きを最小限に抑え、走行ギアが地面に直接動力を伝えることができます。

どのような変更が必要ですか、これは取り付けが難しいですか?
改造は必要なく、取り外して取り付けるだけです。

インストールに他に必要なものはありますか?
いいえ、マウントには取り付けられるすべてのアクセサリが付属しています。商品写真の通りに届きます。

これを自分で取り付けることはできますか?その場合、インストールにはどのくらい時間がかかりますか?
はい、比較的簡単です。インストールには約 20 分かかります。

車両の互換性

日産

V35 スカイライン
Z33 350Z

ユーザーガイド)

Install Videos

Customer Reviews

Based on 18 reviews
89%
(16)
0%
(0)
6%
(1)
0%
(0)
6%
(1)
J
Jon
beautiful

It's funny how small this thing is compared to the OEM mount. I like it.

Z
Zakir Simmons
Solid trans mount

I like the stiffness of the transmission but the vibration (says In bio before purchase) is wildly uncomfortable for myself. If you are building A car for noise, it’s the way to go for sure but other than that I’d choose another route. Overall though it does it’s job and you will not have ti worry about it braking at all.

L
Lucas Storie-Stott
Z33 Solid trans mount

Super solid piece, no searching for gears, gives it a nice straight cut gear whine, best bang for buck of you want to make your car faster, super quick and easy install too, just bare in mind these are super loud and vibrate a lot, if it’s a daily and you aren’t committed to the race car life style then steer clear, otherwise go nuts

D
Doug Lanciano
The Shifter is now direct and firm

Thanks to this awesome solid trans mount, there’s no more hunting for gears due to sloppy rubber bushing mounts

C
Caleb Petrick
GkTech solid trans and engine mounts

Pain in my ass, tolerances on your products need to be stepped up a bit. But with a little ingenuity, I got the fucker to do it’s job. Have not yet installed the motor mounts, hopefully they’re a little easier than the trans installation. Another dumb note, possibly send a shirt or something to repeat customers. I have 900 GkTech stickers but nothing else that supports your products. With that being said, I still love your products and my next purchase will be the front lock out kit. Thanks again and keep doing what you’re doing.

Hi Caleb, thanks for the feedback. What was the actual problem that you encountered? Just so I can check it out on my side. FYI if you spend over $300 in a single transaction you can add a T shirt for free. Over $600 = 2 shirts, over $900 = 3 shirts but if next time you place an order you want some added and you've already spent more than that just let me us know and we'll throw some in for you.

Customer Reviews

Based on 18 reviews
89%
(16)
0%
(0)
6%
(1)
0%
(0)
6%
(1)
J
Jon
beautiful

It's funny how small this thing is compared to the OEM mount. I like it.

Z
Zakir Simmons
Solid trans mount

I like the stiffness of the transmission but the vibration (says In bio before purchase) is wildly uncomfortable for myself. If you are building A car for noise, it’s the way to go for sure but other than that I’d choose another route. Overall though it does it’s job and you will not have ti worry about it braking at all.

L
Lucas Storie-Stott
Z33 Solid trans mount

Super solid piece, no searching for gears, gives it a nice straight cut gear whine, best bang for buck of you want to make your car faster, super quick and easy install too, just bare in mind these are super loud and vibrate a lot, if it’s a daily and you aren’t committed to the race car life style then steer clear, otherwise go nuts

D
Doug Lanciano
The Shifter is now direct and firm

Thanks to this awesome solid trans mount, there’s no more hunting for gears due to sloppy rubber bushing mounts

C
Caleb Petrick
GkTech solid trans and engine mounts

Pain in my ass, tolerances on your products need to be stepped up a bit. But with a little ingenuity, I got the fucker to do it’s job. Have not yet installed the motor mounts, hopefully they’re a little easier than the trans installation. Another dumb note, possibly send a shirt or something to repeat customers. I have 900 GkTech stickers but nothing else that supports your products. With that being said, I still love your products and my next purchase will be the front lock out kit. Thanks again and keep doing what you’re doing.

Hi Caleb, thanks for the feedback. What was the actual problem that you encountered? Just so I can check it out on my side. FYI if you spend over $300 in a single transaction you can add a T shirt for free. Over $600 = 2 shirts, over $900 = 3 shirts but if next time you place an order you want some added and you've already spent more than that just let me us know and we'll throw some in for you.